Solar Battery Cameras: Real Specs, Factory Prices, and How to Spec a Wholesale Order

What a solar battery camera really is, and what it really ships with

A solar battery camera is an outdoor security camera that stands completely on its own: a solar panel charges a lithium pack built into the body, footage moves over a 4G LTE SIM, and video is written straight to a microSD card — no mains run, no WiFi, no NVR, no signal cable. Across the range built by Shenzhen Leksell, the actual specification is this: batteries of 8000mAh to 20000mAh, panels of 8W or 15W, resolution of 1080p–2K (4K only on a dedicated OEM run), microSD up to 128GB, an IP66 housing, and 5–10 minutes of install time per camera. The full catalogue is 150 SKUs with wholesale prices quoted per order; within it, 49 AOV models record continuously.

That is the short answer. The rest of this article is written for people buying in volume — importers, distributors, procurement teams: which numbers are real, which are datasheet theatre, and how to combine specs so the warranty claims don't come back to you.

The four things that actually set the price

The price of a solar battery camera doesn't track the badge on the box. It tracks four very specific things: battery capacity, panel wattage, lens count, and whether the unit records continuously or only on alarm.

Battery and panel have to be matched

This is the easiest line to be misled on when you put two quotes side by side. A large battery paired with a small panel reads beautifully on paper, but if the daily harvest doesn't cover the daily draw, the pack simply walks downhill until the camera goes dormant in the middle of the rainy season. So the pairings are built as sets: 8000mAh with an 8W panel for sunny positions carrying a moderate recording load, and 20000mAh with a 15W panel for partly shaded positions, long wet seasons, or heavier recording duty. Nothing above 20000mAh exists in the catalogue, and you should be sceptical of any quote that offers an unusually large battery figure while holding roughly the same price — that number is usually the one nobody can verify.

Storage and the weather rating are the two lines most often inflated

The standard across this range is microSD up to 128GB. Anything larger is a special order, and it has to be confirmed with the factory rather than inferred from a catalogue page. On the housing, every outdoor model is IP66 — fully dust-tight and rated against pressurised water jets. If your end customer needs a higher ingress rating than that, treat it as a bespoke engineering requirement to raise before the PO is signed, not as something you can assume.

AOV versus PIR: the difference that decides who you can sell to

AOV (Always-On Video) is an industry-generic term, not one manufacturer's proprietary technology: the camera records 24/7 while holding standby draw low through AI scene analysis, instead of leaving a PIR sensor to wake the image sensor.

For B2B buyers in Vietnam and Latin America this distinction is not academic. A livestock loss or a materials theft on site almost always unfolds slowly and over a long window — exactly the situation where a PIR camera misses the part that mattered. That is why the 49 AOV models carry most of the project volume, even though they sit above the entry range on price.

The four AOV series and factory pricing

The figures below are complete and accurate against the current catalogue — you can check them line by line on the product catalogue.

Three models are picked as samples more often than the rest:

• SG-C41G-10T66-V1: single 2K lens, 8000mAh, 8W panel, IP66. The cheapest way into AOV; suits small workshops and owner-operated businesses in good-sun locations.
• SG-D42G-10F66-V1: dual 2K lenses, 8000mAh, 8W panel, IP66. The best-selling balance of price against coverage.
• SG-D42G-15F66-V1: dual 2K lenses, 20000mAh, 15W panel, IP66. For shaded positions, long wet seasons, or a heavier recording schedule.

Spec to the mounting point, not to the price

One simple rule when you build a project configuration: walk the site first and count the positions that lose part of the morning or afternoon to a tree, a metal roof or a tall wall. Those positions go straight onto the 20000mAh/15W configuration; everything else takes 8000mAh/8W. Mixing this way keeps the blended price of the order competitive without leaving a handful of cameras that die on battery — and a dead camera always costs more in warranty work and reputation than the few dollars saved on it.

The triple-lens SG-S43G series earns its place at junctions, wide yard corners, and anywhere one mounting pole has to cover several directions at once. Its value is fewer install points, not a lower price per unit.

Import terms: MOQ, lead times, margins

Shenzhen Leksell was established in 2012 and holds TÜV Rheinland certification alongside CE, FCC and RoHS — that document set is what you need for customs clearance and for public tenders.

The Vietnam office is in Ho Chi Minh City and turns domestic orders around in 7–10 business days — which means you can take samples, install them on a customer's actual site, and decide on volume from what you see, instead of committing to a container off a catalogue.

OEM and private label

OEM and private-label service applies to every model, including all 49 AOV units: your logo, your packaging, manuals in your market's language, and configuration changes to order. The OEM/ODM MOQ is 100 units. Requirements beyond the catalogue — higher resolution, a larger battery and panel, more card capacity — are all things the factory can build, but the price, minimum quantity and lead time for those orders always come back from a person case by case. There is no default figure to quote.

Checklist before you sign the PO

1. Match every model code on the quote against the product page. Code, battery, panel wattage and IP rating should agree character for character.
2. Ask what wattage panel is in the box, not just the battery capacity. This is the single spec most often left off a quotation.
3. Confirm the maximum supported microSD capacity and who supplies the cards — grey-market cards are the number one cause of missing recordings.
4. Check the 4G bands against the carriers in your selling market before you commit to volume.
5. Get the certificates as files for your customs and tender paperwork. Being told they exist is not the same as holding them.
6. Run 10 sample units in real conditions — right season, right sun-and-shade position — before placing an order of 50 or more.

Volume tier pricing and the full catalogue are on the wholesale page; territory distribution terms are on the dealer page. If you need a configuration for a specific project, message us on WhatsApp, call +86 188 1869 9870, or send your list of mounting positions to info@solaguard.net and we'll come back with a position-by-position proposal.