Solar AOV camera "LS-CS9": what that code really is, and what to source instead

Straight answer: what "LS-CS9" is, and what it actually maps to

If you landed here searching for the LS-CS9 solar AOV camera, the first thing worth clearing up is that LS-CS9 is neither a registered brand nor an industry standard. It is an internal catalogue code that circulates among Shenzhen factories and trading companies as generic shorthand for a 4G solar camera with AOV recording. No standards body defines it, nobody owns the nomenclature, and two different suppliers can each sell you "the same LS-CS9" with completely different cells, panels and sensors inside. When an importer writes to us asking for that reference, what they are really asking for is a product category: a self-powered 4G camera with an integrated solar panel, no mains power and no WiFi, recording on AOV (Always-On Video) instead of PIR triggering. In the SolaGuard catalogue that category is 49 AOV SKUs, wholesale prices quoted per order, with 8000 mAh to 20000 mAh batteries, 8 W or 15 W panels, 2K resolution, IP66 sealing and microSD storage up to 128 GB. All of them are built by Shenzhen Leksell (established 2012, TÜV Rheinland certified, plus CE, FCC and RoHS), and all of them are available OEM and private label.

Put another way: don't buy a code, buy a spec sheet. The next section covers what that sheet has to contain, and further down you'll find the exact map of the four AOV series — counts and prices you can check line by line against the product pages.

AOV versus PIR: the difference that decides a tender

AOV stands for Always-On Video: continuous 24/7 recording at low standby draw, because AI scene analysis decides when to raise the capture rate and when to stay in economy mode. It is a generic industry term, not a SolaGuard trademark — which is precisely why it turns up in other people's catalogue codes, including the one you searched for.

The classic alternative is PIR triggering: an infrared sensor picks up a change in heat and wakes the camera. It works, it is cheap, and it has three failure modes your end customer will raise with you, not with the factory:

• Slow movement. Someone walking at a measured pace, or livestock grazing near the pole, may never produce the thermal delta the sensor needs. The recording simply never starts.
• Out-of-zone events. PIR covers a narrow cone. Whatever happens at the edge of frame exists in the image but not in the archive, because nothing recorded it.
• The lost half-second. Between the trigger and the first usable frame you lose the instant that normally holds the plate, the face, or the tool being carried off site.

On a perimeter security tender — farms, ranches, construction sites, equipment yards, ports — that gap is what wins or loses the award. It is why the 49 AOV models are the fastest-moving line among distributors in Latin America and Vietnam, even though the full catalogue runs to 150 SKUs.

The four AOV series: exact counts and prices

This table is the real inventory, not an illustrative sample. If a supplier offers you "an LS-CS9", ask them which of these configurations they actually mean:

Choosing between 8000 mAh / 8 W and 20000 mAh / 15 W

The call is not "more battery is always better" — it is a function of the installation site:

• 8000 mAh with an 8 W panel covers the majority of installations with clear sun and an open horizon: paddocks, rooftops, gate posts. It is also where your unit margin is strongest.
• 20000 mAh with a 15 W panel is for partial shade, long rainy seasons, short-day latitudes, or cameras your customer will pull up live several times a day. If the site has trees, overhangs, or dust that films over the panel, this is the series that prevents the support call six weeks after handover.

A practical rule when you quote: if the installer cannot guarantee a shade-free orientation through the middle of the day, step up to 15 W. The per-unit premium costs less than one service visit.

Dual and triple lens

The dual-lens series (2.0 MP ×2) pair a wide field with a second detail channel — useful when one pole has to cover both a vehicle entrance and the building face. The triple-lens series (2.0 MP ×3, 11 variants) covers three angles from a single mounting point on a single SIM, which cuts the data cost per site. On projects running prepaid 4G lines, that recurring saving outweighs the hardware price difference quickly.

SKU-level detail with full spec sheets is in the product catalogue.

How to audit a spec sheet before you wire the deposit

This is the procedure we recommend you apply to any supplier, ourselves included:

1. Ask for cell capacity in mAh, not in "days of autonomy". Autonomy depends on the site; the cell is a verifiable number. Our real range is 8000–20000 mAh and nothing above that exists in the AOV line.
2. Confirm panel output in watts. 8 W and 15 W, with the surface area that implies. A panel quoted without a wattage is a panel nobody wants you to measure.
3. Get the ingress rating in writing. The AOV models are IP66. If a catalogue promises you a higher rating with no test certificate, ask for the certificate before you sign — ratings inflate easily in this industry.
4. Check the storage ceiling against real cards. The standard here is microSD up to 128 GB. If someone promises larger cards, ask which specific card it was validated with, because the limit comes from the controller, not from the packaging.
5. Match the resolution to the sensor. The line standard is 1080p–2K; higher resolutions exist only as custom or OEM development, with their own lead time and their own cost. A spec sheet promising a top-tier resolution at entry-level pricing is describing a product that will not ship.
6. Ask for certifications in the manufacturer's name, not the trader's: TÜV Rheinland, CE, FCC, RoHS.

If an "LS-CS9" quotation cannot clear those six points, it isn't a product. It's a photograph.

OEM, private label and commercial terms

All 49 AOV models are available OEM and private label, exactly like the rest of the catalogue: your logo, your packaging, your manual, your branding in the firmware. Field installation takes 5 to 10 minutes per camera — a figure worth putting in your proposal when you bid against wired systems, because the labour saving usually exceeds the hardware difference.

The Vietnam office is in Ho Chi Minh City. We do not run a warehouse in Hanoi or Bangkok, and we would rather tell you now than have you build it into your supply chain.

How to start without over-committing

The route that ties up the least capital is a 10-unit trial order mixing two series — say one 8000 mAh/8 W configuration and one 20000 mAh/15 W — installed at the two worst sites in your market rather than the two best. If they hold up there, they hold up everywhere else. With that evidence in hand, the step to 100 units under your own brand stops being a gamble and becomes an inventory decision.

Full volume terms are on the wholesale page, and territory and support structure on the dealer program. Quantities, final pricing and delivery dates are always confirmed by a person, never by a web page: email info@solaguard.net or message us on WhatsApp at +86 188 1869 9870 with the site, the quantity and the deadline, and we will come back with the exact configuration and model number.